Garage Door Repair for All Those Noisy Openers

Most likely you didn’t think about this aspect when you bought the garage door, but with time the parts may not work together as smoothly as they used to and noises might begin. Although this may not bother you, it sure is annoying to those who need to sleep above or next to it. In case the door isn’t working as it is supposed to, it shouldn’t be difficult to take care of the problem. Read more about garage door repair South Jordan

Going nuts about the nuts

The first and easiest thing to try is to use an adjustable wrench or socket wrench to tighten the nuts on the track and the door. Although everything should be tight, make sure that they aren’t too tight.

It might be the rollers

As you may have guessed, it is possible for the old metal rollers to make a lot of noise as they roll up and down on the old metal tracks. If you listen carefully, you could identify the source of the noise and if this is it, all you have to do is to change the rollers. You should do the same if the rollers look worn or rusty.

In case you have a regular five-section door, this kind of garage door repair will need you to buy about twelve rollers. It is best not to use metal rollers, so consider buying nylon ones. These don’t need regular maintenance, and they don’t make a lot of noise. However, you should expect to pay more for them; a set of metal rollers costs about $40 while a set of nylon rollers will cost you around $60.

Generally speaking, a roller is made of a 2-inch roller on a 4-inch stem. Nonetheless, it might be best for you to measure the rollers of your garage door to make sure that you buy the right size. The good news about this garage door repair project is that the replacement of the rollers takes only about an hour.

Replacing the hinges

Another option to reduce the noise made by the door is to replace the hinges. The hinge houses the stem of the roller and with time it can become worn. Take a look at all of the hinges, and if you notice a hole that is oblong instead of being round, you should replace it.

You should be able to find the source of the noise, but you may wish to let a professional repair person handle the problem to avoid injuries.

Be very careful about garage door repair

Keep in mind that garage doors come with two different kinds of mechanisms. The extension springs can be found on both sides over the upper tracks. The torsion springs can be found secured to the header, right above the closed door. If you have a door with torsion springs, you should never try to replace the rollers on your own. These are under tension and if you do something with the lower brackets, there is a high chance for you to be seriously injured. This is a job for pros only.